Product ID:10710,10720 ALUMINUM LIQUID (F-2) RESIN
MSDS Date:05/05/1995
FSC:8040
NIIN:00F049877
Kit Part:Y
MSDS Number: BZWSQ

ITW DEVCON CORPORATION

30 ENDICOTT ST
DANVERS, MA 01923-5000
US

Emergency Phone: 508-777-1100

Info Phone: 508-777-1100

Cage: 16509

ITW DEVCON CORPORATIO

DANVERS, MA 01923 US

Telephone: 508-777-1100

Cage: 16509

BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN, EPON 820,

CAS: 25068-38-6

RTECS: KD4380000

Fraction By Weight: 15-35%

OSOXIDE 8, C12 AND C14 ALKYL GLYCIDYL ETHERS *96-2*

CAS: 68609-97-2

Fraction By Weight: 1-10%

LD50 LC50 Mixture:ORAL LD50(RAT): >10 G/KG (SEE SUPP)
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MILD TO MODERATE IRRITATION.
SKIN: MILD TO MODERATE IRRITATION, MAY CAUSE SENSITIZATION.
INHALATION: VAPORS MAY CAUSE IRRITATION IN THE RESPIRATORY TRACT.
INGESTION: LOW TOXICITY, CAN CAUSE GI I RRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, NAUSEA, VOMITING, DIARRHEA,
ITCHING, SWELLING, RASH.
Medical Cond Aggravated by Exposure:ALLERGIES, ECZEMA & OTHER SKIN
DISORDERS.

First Aid:EYES: FLUSH W/CLEAN WATER FOR 15 MINS. SKIN: WASH THOROUGHLY
W/SOAP & WARM WATER. INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN
IF NEEDED. INGESTION: DON'T INDUCE VOMITING. DILUTE W/2 GLASSES OF
WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:PMCC
Flash Point:>400F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:WEAR SCBA & PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:TOXIC SMOKE & VAPORS MAY FORM DURING
COMBUSTION.

Spill Release Procedures:PREVENT SKIN CONTACT. VENTILATE AREA. SCRAPE
UP & DISCARD IN SUITABLE CONTAINERS, USING INERT ABSORBENT MATERIAL
SUCH AS VERMICULITE IF NEEDED. WASH AREA W/AN INDUSTRIAL CLEANING
AGENT; IF SOLVENT IS USED, TAKE CARE AGAINTS OVEREXPOSURE & FIRE.

Handling and Storage Precautions:STORE WELL CLOSED IN A COOL, DRY
PLACE. AFTER MIXING W/HARDENER, OBSERVE PRECAUTIONS RECOMMENDED FOR
THE HARDENER.
Other Precautions:AFTER PROPER CURING THE PRODUCT ISN'T HAZARDOUS. WHEN
SANDING/MACHINING THE CURED MATERIAL, TAKE PROPER PRECAUTIONS
AGAINST INHALATION OF THE DUSTS GENERATED, THESE MAY INCLUDE
ALUMINUM POWDER.

Respiratory Protection:NONE REQUIRED AT NORMAL HANDLING TEMPS. USE
ORGANIC VAPOR CARTRIDGES AS NEEDED.
Ventilation:LOCAL EXHAUST IS RECOMMENDED FOR CONFINED AREAS. MECHANICAL
(GENERAL) FOR NORMAL USE.
Protective Gloves:CHEMICAL RESISTANT RUBBER
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS
Other Protective Equipment:PROTECTIVE GEAR.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING &
PROTECTIVE GEAR BEFORE REUSE. WASH THOROUGHLY AFTER USING/BEFORE
EATING/SMOKING.
Supplemental Safety and Health
DISCARD DECONTAMINATD LEATHER ARTICLES, SUCH AS SHOES & BELTS. THE ORAL
LD50 INFORMATION IS FOR ALKYL GLYCIDYL ETHER.

Vapor Pres:0
Vapor Density:>1
Spec Gravity:1.92
pH:7
Evaporation Rate & Reference:(BU AC = 1): <1
Solubility in Water:0
Appearance and Odor:DARK GREY PASTE W/LITTLE ODOR
Percent Volatiles by Volume:100/WT

Stability Indicator/Materials to Avoid:YES
INCOMPLETE COMBUSTION, STRONG ACIDS, BASES, ALIPHATIC AMINES,
OXIDIZERS.
Stability Condition to Avoid:OPEN FLAME, EXTREME HEAT
Hazardous Decomposition Products:OXIDES OF CARBON, ALDEHYDES, ACIDS &
OTHER ORGANIC COMPOUNDS.
Conditions to Avoid Polymerization:HEAT IS RELEASED WHEN THIS RESIN IS
MIXED W/EPOXY HARDENER. USE CAUTION WHEN MIXING A POUND/MORE.

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.